Firmware Change Logs

 
 

V1.1 Light Controller Change Log:


V1.1d Change Log: released 7/1/2016

  1. 1.Identified and resolved issues with Strobe Cycle Times on High Power Controllers.

  2. 2.Identified and resolved issues with Dual Beacon Fader times on 450, 600 and High Power Controllers.


V1.1c Change Log: released 7/4/2015

  1. 3. Added ability to reverse RC Inputs to enable more versatility.

  2. 4. Reduced the number of strobe pulses from 5 to 3 based on storage space after adding the RC Input reversing capability.

  3. 5. Shortened GUI descriptions to free memory used to run the Graphical User Interface (GUI).


V1.1b Change Log: released 2/27/2015

This update is only to resolve display issues on the Windows Tablets.

This update will affect your saved setting.


V1.1a Change Log: This is a minor update and will not affect your programed settings.

  1. 1.Identified and fixed issue with Warning Lights not turning off in certain circumstances.

  2. 2.Identified and fixed timing issues.

  3. 3.Increased Beacon Strobe from 20ms to 30ms.


V1.1 Change Log:

  1. 1.Identified and fixed issue with Strobe Lights not turning off in certain circumstances.

  2. 2.Added the ability to substitute Strobe 3 to create a second Beacon Light.

  3. 3.Added new Beacon light function with a short pulse after ramping to full brightness.

  4. 4.Added ability to change the brightness of the Beacon light.

  5. 5.Added Fade Up and Fade Down time Intervals for the Beacon Lights.

  6. 6.Added independent Beacon Cycle times to create random effect.

  7. 7.Removed the ability to change GUI color due to space constraints on the micro controller.

  8. 8.Rearranged the GUI layout for easier navigation.


V2 Light Controller Change Log:


V2e Change Log: released 3/2/2017

  1. 1.Identified and resolved an issue with LiPo / LiFe monitoring stability. Voltage stability should be more consistent due to new algorithms created along with a new smoothing algorithm.

  2. 2.Re-worked the algorithm that determines voltage output resulting in a more precise reading when input voltage changes from USB to BEC power.

  3. 3.Added a initialization time to allow the new voltage output to stabilize before checking monitored pack voltage. The initialization check occurs 10 seconds after powering up the controller.

  4. 4.Reduced the voltage scale to only report voltages within a reasonable range for the number of cells selected. Instead of showing 0 - 50.4V now the graph shows 33.6V - 50.4V. Please allow 5 seconds for voltage to start reporting.


V2d Change Log: released 7/1/2016

  1. 1.Identified and resolved issues with Strobe Cycle Times on High Power Controllers.

  2. 2.Identified and resolved issues with Dual Beacon Fader times on 450, 600 and High Power Controllers.


V2c1 Change Log: released 4/29/2016

  1. 1. Stability improvement for monitored battery voltage output on GUI.

  2. 2. Will not affect current settings if upgrading from V2c.


V2c Change Log: released 7/4/2015

  1. 1. Added ability to reverse RC Inputs to enable more versatility.

  2. 2. Reduced the number of strobe pulses from 5 to 3 based on storage space after adding the RC Input reversing capability.

  3. 3. Shortened GUI descriptions to free memory used to run the Graphical User Interface (GUI).


V2b: Initial release